Maintenance & Care | Cleaning and Caring for your Epoxy Floor.

epoxy polyaspartic garage floor frisco tx
Our ‘Basic’ garage floor coating – Frisco, TX

Maintenance and cleaning of your garage floor is very simple. Here are some tips and techniques for keeping it looking great for years to come.

1. The amount of time the coating needs to cure will vary with temperature, atmospheric conditions, as well as the condition of the concrete. The minimum is at least 24 HOURS before allowing foot traffic, and AT LEAST 48 HOURS before driving on or moving heavy objects onto the floor.

2. Refrain from dragging heavy objects across the epoxy floor. Though the polyaspartic coating is highly abrasion resistant, it is not completely impervious to scratching or damage.

4. The coating is also stain resistant – but NOT stain-proof. Wiping up oil and and other stains in a somewhat timely manner will help ensure your floor stays looking great.

5. Battery acid is one of very few chemicals that WILL HURT the epoxy and polyaspartic coating. If you have an electric golf cart you may want to consider getting a Golf Cart Parking Mat or using a cookie sheet underneath the battery compartment. Motorcycles and other vehicles with small batteries often have a vented battery that may occasionally discharge small amounts of acid onto the garage floor. You should consider using a mat or tray for those as well. Be cautious with brake fluid and any highly corrosive agents.

6. Continuous Abrasion – A good example of this is placing your motorcycle’s kickstand in the exact same spot every time you park it. The floor coating is highly abrasion resistant but repeated abrasion over a long period of time may wear the floor prematurely.

7. To clean the floor, start by sweeping, vacuuming, or blowing out the garage floor. You can use a pump-sprayer or garden hose to mist the floor, it is not necessary to completely saturate the floor with water. Next, use a soft-foam squeegee to pull the water out of the garage – the foam will remove dust, dirt, light stains and debris with it. A rubber squeegee will smear dirt and oil, foam captures the dirt and oil and pulls it out with the water.

8. DO NOT USE DETERGENTS or WAXES to clean your garage floor coating. Detergents leave behind a residue on surfaces like the garage floor. Over time, the film will cause your floor to look hazy and dull, and may prevent us from being able to repair the floor. This is also true of mopping additives like “Mop & Glo”. If you feel you need more than water to get the surface clean, non-detergent cleaning products such as “Fabuloso” work great. Vinegar or Ammonia will also do the trick.

Learn more about our Methods & Processes


Check out our recent work over on FacebookInstagramGoogle +, or Pinterest!

Get a Free Estimate Today!

Call Now Button